由 google Understanding the 01488 ETH Network Interface
Have you ever wondered about the intricacies of your network interface, specifically the 01488 ETH? This article delves into the details of this network interface, providing you with a comprehensive understanding of its functionalities and configuration.
What is 01488 ETH?
The 01488 ETH refers to a specific network interface on your computer. It is an Ethernet interface, which is a widely used technology for connecting devices in a local area network (LAN) or to the internet. The number “01488” is a unique identifier for this interface, distinguishing it from other network interfaces on your system.
Understanding Ethernet Technology
Ethernet is a networking technology that allows devices to communicate with each other over a network. It operates at the data link layer of the OSI model and uses a set of protocols to facilitate communication. The most common Ethernet standards include 10 Mbps, 100 Mbps, and 1000 Mbps, with the latter also known as Gigabit Ethernet.
Features of the 01488 ETH Interface
The 01488 ETH interface offers several key features:
| Feature | Description |
|---|---|
| Speed | Supports various speeds, including 10 Mbps, 100 Mbps, and 1000 Mbps (Gigabit Ethernet) |
| Interface Types | Supports MII, RMII, and RGMII interfaces |
| Full/Half Duplex | Supports both full-duplex and half-duplex modes of operation |
| Frame Size | Supports Ethernet frames up to 1522 bytes in size |
Configuration of the 01488 ETH Interface
Configuring the 01488 ETH interface involves several steps:
- Enable and reset the ETH module using the Eth17GEthMacInit API.
- Initialize the MDIO interface using the Eth17GEthMacInit API.
- Set the controller mode using the Eth17GEthMacSetControllerMode API.
- Set the MAC address using the Eth17GEthMacSetPhysAddr API.
- Configure the PHY registers using the Eth17GEthMacWriteMii and Eth17GEthMacReadMii APIs.
- Transmit and receive data using the Eth17GEthMacTransmit and Eth17GEthMacReceive APIs.
Using the Eth17GEthMac API
The Eth17GEthMac API provides a set of functions to interact with the ETH module. Some of the key functions include:
- Eth17GEthMacInit: Enables, resets, and initializes the ETH module and MDIO interface.
- Eth17GEthMacProvideTxBuffer: Establishes a transmit buffer for a specified transmission, with parameters including the controller, buffer ID, buffer content, and length.
- Eth17GEthMacSetControllerMode: Sets the mode of the Ethernet controller.
- Eth17GEthMacGetControllerMode: Retrieves the mode of the Ethernet controller.
- Eth17GEthMacSetPhysAddr: Sets the MAC address of the controller.
- Eth17GEthMacGetPhysAddr: Retrieves the MAC address of the controller.
- Eth17GEthMacWriteMii: Sets the content of the PHY registers.
- Eth17GEthMacReadMii: Reads the content of the PHY registers.
- Eth17GEthMacTransmit: Transmits Ethernet data.
- Eth17GEthMacReceive: Receives Ethernet data.
- Eth17GEthMacTxConfirmation: Callback function for Ethernet data transmission confirmation.